Table of Contents

Name

psetup_v2 - list processor program setup script

Description

psetup_v2 is used by listp_v2(8) to initialize CAMAC modules before beginning a measurement block. Typically counters are cleared and possible data pending in the peak holding ADC is cleared before enabling the list processor.

The script uses the camac_script package. See camac_script_v2(5) for usage information.

Example psetup script

This script is for use with a KSC3610 counter module and a Phillips 7164 peak hold ADC.
#
#
#
                # definitions

define crate 4                #
define Ncntr 4                # counter slot number
define Nadc 5                # adc slot number
                # adc setup

camac_nrm crate Nadc 0 9 0        # reset it
camac_nrm crate Nadc 0 26 0        # enable lams
                # counter setup

camac_nrm crate Ncntr 0 24 0        # clr lam enable
camac_scan crate Ncntr 0 2 9 6    # clear counter registers

See Also

listp_v2(8) , lprg_v2(5)

Manual page revision

$Id: psetup_v2.5,v 2.0 2003/05/01 18:06:31 kitchen Exp $

Table of Contents